[Aug-2023] HPE6-A66 Dumps PDF - HPE6-A66 Real Exam Questions Answers
HPE6-A66 Dumps 100% Pass Guarantee With Latest Demo
NEW QUESTION # 12
Refer to the exhibit.
When planning the use of Cat7 cabling for a SmartRate connection between an ArubaOS AP and an ArubaOS switch, which sections should be considered when calculating distance?
- A. A + C
- B. A + B + C
- C. A + B
- D. A + B + C + D
Answer: D
NEW QUESTION # 13
A customer currently has sets of three Aruba 5406R switches deployed for an access layer in multiple wiring closets in a building They are clustered in a VSF domain The customer wants to set up Multiple Active Detection (MAD) for the OOBM port, as well as use this port for remote management access. To simplify the connectivity, the customer wants to connect these three switches' OOBM ports to a separate switch in the wiring closet for the OOBM connectivity.
Which would be the most cost-effective solution that would meet the customer's requirements?
- A. 5406R
- B. 2930M
- C. 0
- D. 2930F
Answer: C
NEW QUESTION # 14
NewStellar has a main corporate campus in a business park with two adjacent buildings that are 150 feet apart (46 meters). This is an open campus with no obstructions between the two buildings Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters) The network architect has given one floor to analyze. Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply, and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters).
The company has determined that Wi-Fi coverage will not include the central area of each floor, which includes the washrooms, stairs, elevators and supply and network cabinets. Based on a capacity design, approximately how many APs should a network architect add to each floor to plan the design in VisuaiRF?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 15
A network architect has developed a design for a new Aruba Wi-Fi network that will include a virtual Mobility Master (MM) running the ArubaOS 8.4 operating system that will manage:
* Two clustered 7210 controllers with 600 campus APs
* Two clustered VMC-50 controllers with 75 remote APs
* Wireless IPS
The architect plans on creating user roles and firewall policies on the controllers as well as implementing AirMatch. What would meet the license requirements for this scenario?
- A. LIC-MM-VA-1000 (X1). LIC-MC-VA-50 (X1), LIC-AP (x675). PEF (X675), RFP (X675)
- B. LIC-MM-VA-50 (X1), LIC-MC-VA-50 (x2). LIC-AP (X675), PEF (x675), RFP (X675)
- C. LIC-MM-VA-1000 (X1), LIC-MC-VA-50 (x2), LIC-AP (X675). PEF (X675). RFP <x675)
- D. LIC-MM-VA-1000 (X1), LIC-MC-VA-50 (x1), LIC-AP (x600). PEF (X600), RFP (x600)
Answer: A
NEW QUESTION # 16
Which component uniquely defines the BSSID when implementing an employee SSID?
- A. Case-insensitive SSID name
- B. Wireless device MAC address
- C. Case-sensitive SSID name
- D. Radio MAC address
Answer: B
NEW QUESTION # 17
A company is installing Internet of Things (loT) devices to support a smart and energy-efficient environment for a building, including loT devices for heating and air conditioning, lights, and window shades. loT devices of these types are typically classified as which category of devices?
- A. Highly mobile devices (HMD)
- B. Somewhat mobile devices (SMD)
- C. Stationary devices
- D. Nomadic devices
Answer: D
NEW QUESTION # 18
Which feature does the Aruba AP 555 support? (Select two.)
- A. high density indoor locations
- B. weather proof and temperature hardened
- C. desk wall plate mounted
- D. 802.11ac and lower standards only
- E. three radios
Answer: A,D
NEW QUESTION # 19
A customer requires a campus core virtualization solution that supports a dual control and management planes, as well as active-active forwarding paths. Which solution would meet the customer's requirements?
- A. VSX
- B. VSF
- C. Backplane stacking
- D. Mesh stacking
Answer: C
NEW QUESTION # 20
A network architect is redesigning a wireless network. The architect begins by analyzing the number of spatial streams supported by APs of various vendors as well as the wireless devices currently in the network, if the company wants to ensure that new wireless design, including user wireless devices, support Multi-User MIMO (MU-MIMO). which standard or standards must the wireless products support?
- A. Only 802.11ax,802.11ac, 802.11n, and 802.11a
- B. Only 802.11ax and 8011.ac
- C. Only 802.11ax
- D. Only 802.11ax,802.1lac, and 802.l1n
Answer: D
NEW QUESTION # 21
A customer placed an order for an ArubaOS 5406R switch and plans to rack mount it in a wiring closet. The dimensions of the switch are 17.5 inches wide (44.45 cm), 6.9 inches high (17.5 cm), and 17.75 inches deep (45.1 cm). How many rack units should a customer plan for this switch?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 22
A network architect is creating a new wireless solution for a customer. Wireless coverage is required throughout all four floors of two buildings on the same campus. Dynamic RF capabilities, including AirMatch, are required. Seamless roaming is required within and between the two buildings. Each floor will have approximately 20 APs and 6 external APs are required for connectivity between the two buildings.
- A. Two 7030 mobility controllers in a cluster
- B. Two 7205 mobility controllers in a cluster
- C. A standalone 7008 controller per floor
- D. Given this information, which Aruba solution would be the most cost-effective while still meeting the customer's requirements? O An IAP cluster per floor
Answer: D
NEW QUESTION # 23
A network architect is replacing an old wireless implementation based on 802.11 a with a new wireless solution. The company has a lot of money invested in legacy wireless barcode scanners and will not be replacing them. However, the bandwidth that the company expects each AP to have less than 700 Mbps in bandwidth, and this is not expected to change in the future.
Which wireless solution would best meet this company's needs and be the most cost-effective?
- A. 802.11g
- B. 802.11ac
- C. 802.11ax
- D. 802.11n
Answer: C
NEW QUESTION # 24
A customer has over 100 access layer switches. The customer requires user authentication done via the Aruba Dynamic Segmentation feature. What components are required to implement this solution? (Select two.)
- A. enterpnse authentication server
- B. Aruba APs
- C. AirWave server
- D. Aruba mobility controller
- E. Active Directory server
Answer: C,D
NEW QUESTION # 25
A customer has some employees that travel to various locations, where these employees will need Wi-Fi access at these locations. Because many of these locations do not have wireless support, the employees will need to carry an AP solution with them. Internet connectivity, if it doesn't exist at these locations, will be provided by a national phone company USB wireless card which will be connected to AP. The wireless solution needs minimal bandwidth, but needs to minimally support 802.1 lac wave 1 devices.
Which Aruba AP wireless solution would meet the needs of these employees most effectively and cost efficiently?
- A. 0
- B. 303H
- C. 1
- D. 203R
Answer: D
NEW QUESTION # 26
A company is redesigning their wireless network and will be upgrading all devices to support the latest wireless standards. The company is not near any radar installations. In order to keep wireless NIC power levels as low as possible to reduce interference issues and to take advantage of radar frequency ranges, what IEEE standard should APs support?
- A. 802.11 ax
- B. 802.11r
- C. S02.11V
- D. S02.11h
Answer: A
NEW QUESTION # 27
A company has hired a network architect to replace an existing legacy wireless and wired network The building is one-story and contains four wiring closets Based on the information the network architect gathered from the company, one 48-port POE+ switch and three 48-port non-POE+ switches will be placed in each wiring closet. One stacking domain should be created for each wiring closet that supports 40 Gbps uplinks.
Which stacking solution should the architect implement for the floor that meets the requirements and is the most cost-effective'?
- A. Distributed trunking
- B. VSX
- C. VSF
- D. Backplane stacking
Answer: B
NEW QUESTION # 28
A company has two buildings on a campus, where each building has three floors, which two wiring closets per floor Assume that there will be 24 APs connected via POE+ to each wiring closet, along with 128 wired user connections. Which backplane stacking solution will provide the necessary Ethernet port capacity for all devices on Building 1 Floor 2 and is fully meshed?
- A. Two 381 OM 24-port POE+ switches and three 381OM 48-port switches per wiring closet
- B. Two 2930F 24-port POE+ switches and three 2930F 48-port switches per wiring closet
- C. One 2930M 24-port POE+ switch and two 2930M 48-port switches per wiring closet
- D. One 381 OM 24-port POE+ switches and two 2930M 48-port switches per wiring closet
Answer: C
NEW QUESTION # 29
......
Dumps Real HP HPE6-A66 Exam Questions [Updated 2023]: https://torrentlabs.itexamsimulator.com/HPE6-A66-brain-dumps.html
