Get Special Discount Offer on AZ-700 Dumps PDF [UPDATED Jul-2024]
PDF Download Microsoft Test To Gain Brilliante Result!
Microsoft AZ-700 exam is one of the most sought-after certifications in the field of cloud computing. By earning this certification, you can prove your expertise in designing and implementing Azure network solutions. Designing and Implementing Microsoft Azure Networking Solutions certification can help you to showcase your skills and knowledge to potential employers and clients. Additionally, it can help you to advance your career and increase your earning potential.
NEW QUESTION # 111
Your company has offices in Montreal. Seattle, and Paris. The outbound traffic from each office originates from a specific public IP address.
You create an Azure Front Door instance named FD1 that has Azure Web Application Firewall (WAF) enabled. You configure a WAF policy named Policy! that has a rule named Rule1. Rule1 applies a rate limit of 100 requests for traffic that originates from the office in Montreal.
You need to apply a rate limit of 100 requests for traffic that originates from each office.
What should you do?
- A. Create two additional associations.
- B. Modify the rule type of Rule1.
- C. Modify the conditions of Rule1.
- D. Modify the rate limit threshold of Rule1.
Answer: A
NEW QUESTION # 112
You have an Azure Front Door instance named FD1 that is protected by using Azure Web Application Firewall (WAF).
FD1 uses a frontend host named app1.contoso.com to provide access to Azure web apps hosted in the East US Azure region and the West US Azure region.
You need to configure FD1 to block requests to app1.contoso.com from all countries other than the United States.
What should you include in the WAF policy?
- A. a frontend host association
- B. a custom rule that uses a match rule
- C. a custom rule that uses a rate limit rule
- D. a managed rule set
Answer: B
NEW QUESTION # 113
You have the Azure App Service app shown in the App Service exhibit.
The VNet Integration settings for as12 are configured as shown in the Vnet Integration exhibit.
The Private Endpoint connections settings for as12 are configured as shown in the Private Endpoint connections exhibit.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/app-service/web-sites-integrate-with-vnet
NEW QUESTION # 114
You have an Azure virtual network named Vnet1 that contains two subnets named Subnet1 and Subnet2. You have the NAT gateway shown in the NATgateway1 exhibit, (Click the NATgateway1 tab)
You have the virtual machine shown in the VM1 exhibit, (Click the VM1 tab)
Subnet1 is configured as shown in the Subnet1 exhibit, (Click the Subnet1 tab)
For each of the following statements, select Yes if the statement is true. Otherwise, select No
Answer:
Explanation:
NEW QUESTION # 115
Your company has an office in New York.
The company has an Azure subscription that contains the virtual networks shown in the following table.
Name
Location
Vnet1
East LS
Vnet2
North Europe
Vnet3
West US
Vnet4
West Europe
You need to connect the virtual networks to the office by using ExpressRoute. The solution must meet the following requirements:
* The connection must have up to 1 Gbps of bandwidth.
* The office must have access to all the virtual networks.
* Costs must be minimized.
How many ExpressRoute circuits should be provisioned, and which ExpressRoute 5KU should you enable?
- A. one ExpressRoute Premium circuit
- B. one ExpressRoute Standard circuit
- C. two ExpressRoute Premium circuits
- D. four ExpressRoute Standard circuits
Answer: A
NEW QUESTION # 116
You have an Azure subscription that contains two virtual networks named Vnet1 and Vnet2.
You register a public DNS zone named fabrikam.com. The zone is configured as shown in the Public DNS Zone exhibit.
You have a private DNS zone named fabrikam.com. The zone is configured as shown in the Private DNS Zone exhibit.
You have a virtual network link configured as shown in the Virtual Network Link exhibit.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 117
You have an Azure Front Door instance named FrontDoor1.
You deploy two instances of an Azure web app to different Azure regions.
You plan to provide access to the web app through FrontDoor1 by using the name app1.contoso.com.
You need to ensure that FrontDoor1 is the entry point for requests that use app1.contoso.com.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
NEW QUESTION # 118
You have an Azure application gateway configured for a single website that is available at https://www.contoso.com.
The application gateway contains one backend pool and one rule. The backend pool contains two backend servers. Each backend server has an additional website that is available on port 8080.
You need to ensure that if port 8080 is unavailable on a backend server, all the traffic for https://www.contoso.com is redirected to the other backend server.
What should you do?
- A. Add a new rule.
- B. Add a new listener.
- C. Create a health probe.
- D. Change the port on the listener.
Answer: C
NEW QUESTION # 119
In which NSGs can you use ASG1 and to which virtual machine network interfaces can you associate ASG1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 120
Your company has 10 instances of a web service. Each instance is hosted in a different Azure region and is accessible through a public endpoint.
The development department at the company is creating an application named App1. Every 10 minutes. App1 will use a list of end points and connect to the first available endpoint.
You plan to use Azure Traffic Manager to maintain the list of endpoints.
You need to configure a Traffic Manager profile that will minimize the impact of DNS caching.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/traffic-manager/traffic-manager-routing-methods
https://docs.microsoft.com/en-us/azure/traffic-manager/traffic-manager-endpoint-types
NEW QUESTION # 121
You create NSG10 and NSG11 to meet the network security requirements.
For each of the following statements, select Yes it the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Yes
subnet1(WM1->NSG1 outbound->NSG10 outbound)->subnet2(NSG1 inbound->NSG11 inbound->VM2) Yes NSG10 blocks ICMP from VNet4 (source 10.10.0.0/16) but it is not blocked from VM2E's subnet (VNet1/Subnet2).
No
NSG11 blocks RDP (port TCP 3389) destined for VirtualNetworke's. VirtualNetwork is a service tag and means the address space of the virtual network (VNet1) which in this case is 10.1.0.0/16. Therefore, RDP traffic from subnet2 to anywhere else in VNet1 is blocked.
NEW QUESTION # 122
Your company has offices in Montreal. Seattle, and Paris. The outbound traffic from each office originates from a specific public IP address.
You create an Azure Front Door instance named FD1 that has Azure Web Application Firewall (WAF) enabled. You configure a WAF policy named Policy! that has a rule named Rule1. Rule1 applies a rate limit of
100 requests for traffic that originates from the office in Montreal.
You need to apply a rate limit of 100 requests for traffic that originates from each office.
What should you do?
- A. Create two additional associations.
- B. Modify the rule type of Rule1.
- C. Modify the conditions of Rule1.
- D. Modify the rate limit threshold of Rule1.
Answer: C
NEW QUESTION # 123
You have two Azure subscriptions named Subscnption1 and Subscription2. Subscription1 contains a virtual network named Vnet1. Vnet1 contains an application server. Subscription2 contains a virtual network named Vnet2.
You need to provide the virtual machines in Vnet2 with access to the application server in Vnet1 by using a private endpoint.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - In Subscription1, accept the private endpoint connection request.
2 - Enable virtual network peering between Vnet1 and Vnet2.
3 - Deploy an Azure Standard Load Balancer in front of the application server.
4 - In Subscription1, create a private link service and attach the service to the frontend IP configuration of the load balancer.
NEW QUESTION # 124
You need to ensure that all hosts deployed to subnet3-2 connect to the internet by using the same static public IP address. The solution must minimize administrative effort when adding hosts to the subnet.
Answer:
Explanation:
See the Explanation below for step by step instructions.
Explanation
Here are the steps and explanations for ensuring that all hosts deployed to subnet3-2 connect to the internet by using the same static public IP address:
* To use the same static public IP address for multiple hosts, you need to create a NAT gateway and associate it with subnet3-2. A NAT gateway is a resource that performs network address translation (NAT) for outbound traffic from a subnet1. It allows you to use a single public IP address for multiple private IP addresses2.
* To create a NAT gateway, you need to go to the Azure portal and select Create a resource. Search for NAT gateway, select NAT gateway, then select Create3.
* On the Create a NAT gateway page, enter or select the following information and accept the defaults for the remaining settings:
* Subscription: Select your subscription name
* Resource group: Select your resource group
* Name: Type a unique name for your NAT gateway
* Region: Select the same region as your virtual network
* Public IP address: Select Create new and type a name for your public IP address. Select Standard as the SKU and Static as the assignment method4.
* Select Review + create and then select Create to create your NAT gateway3.
* To associate the NAT gateway with subnet3-2, you need to go to the Virtual networks service in the Azure portal and select your virtual network.
* On the Virtual network page, select Subnets under Settings, and then select subnet3-2 from the list.
* On the Edit subnet page, under NAT gateway, select your NAT gateway from the drop-down list. Then select Save.
NEW QUESTION # 125
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure application gateway that has Azure Web Application Firewall (WAF) enabled.
You configure the application gateway to direct traffic to the URL of the application gateway.
You attempt to access the URL and receive an HTTP 403 error. You view the diagnostics log and discover the following error.
You need to ensure that the URL is accessible through the application gateway.
Solution: You add a rewrite rule for the host header.
Does this meet the goal?
- A. No
- B. Yes
Answer: A
NEW QUESTION # 126
You plan to configure BGP for a Site-to-Site VPN connection between a datacenter and Azure.
Which two Azure resources should you configure? Each correct answer presents a part of the solution. (Choose two.) NOTE: Each correct selection is worth one point.
- A. a virtual network gateway
- B. Azure Firewall
- C. Azure Front Door
- D. Azure Application Gateway
- E. a local network gateway
Answer: A,E
NEW QUESTION # 127
You are implementing the virtual network requirements for VM Analyze.
What should you include in a custom route that is linked to Subnet2? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Graphical user interface, text, application Description automatically generated
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-networks-udr-overview
NEW QUESTION # 128
You have an Azure Front Door instance named FrontDoor1.
You deploy two instances of an Azure web app to different Azure regions.
You plan to provide access to the web app through FrontDoor1 by using the name app1.contoso.com.
You need to ensure that FrontDoor1 is the entry point for requests that use app1.contoso.com.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
Table Description automatically generated
NEW QUESTION # 129
Your company has five offices. Each office has a firewall device and a local internet connection. The offices connect to a third-party SD-WAN.
You have an Azure subscription that contains a virtual network named Vnet1. Vnet1 contains a virtual network gateway named Gateway1. Each office connects to Gateway1 by using a Site-to-Site VPN connection.
You need to replace the third-party SD-WAN with an Azure Virtual WAN. What should you include in the solution?
- A. Enable active-active mode on Gateway1.
- B. Create an Azure Traffic Manager profile.
- C. Create new Point-to-Site (P2S) VPN connections on the firewall devices.
- D. Delete Gateway1.
Answer: C
NEW QUESTION # 130
You have an Azure application gateway named AppGw1.
You need to create a rewrite rule for AppGw1. The solution must rewrite the URL of requests from
https://www.contoso.com/fashion/shirts to
ttps://www.contoso.com/buy.aspx?category-fashion&product=shirts.
How should you complete the rule? To answer NOTE: Each correct selection is worth one point appropriate options in the answer area.
Answer:
Explanation:
NEW QUESTION # 131
You have an Azure Front Door instance that provides access to a web app. The web app uses a hostname of www.contoso.com.
You have the routing rules shown in the following table.
Which rule will apply to each incoming request? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/frontdoor/front-door-route-matching
NEW QUESTION # 132
You have the Azure App Service app shown in the App Service exhibit.
The VNet Integration settings for as12 are configured as shown in the Vnet Integration exhibit.
The Private Endpoint connections settings for as12 are configured as shown in the Private Endpoint connections exhibit.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/app-service/web-sites-integrate-with-vnet
NEW QUESTION # 133
You have an Azure virtual network named Vnet1 that contains two subnets named Subnet1 and Subnet2.
You have the NAT gateway shown in the NATgateway1 exhibit.
You have the virtual machine shown in the VM1 exhibit.
Subnet1 is configured as shown in the Subnet1 exhibit.
For each of the following statements, select Yes of the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/nat-gateway/nat-gateway-resource
NEW QUESTION # 134
You have on-premises datacenters in New York and Seattle.
You have an Azure subscription that contains the ExpressRoute circuits shown in the following table.
Name
Azure region
Datacenter
ERC1
East US
New Vork
ERC2
West US2
Seattle
You need to ensure that all the data sent between the datacenters is routed via the ExoressRoute circuits. The solution must minimize costs.
Answer:
Explanation:
NEW QUESTION # 135
......
Optional Material for the Prep Process
After getting an overview of what is waiting for you at the exam, you need to know the options of how to prepare for it. The vendor offers free and paid options for its candidates.
The free option for the AZ-700 exam implies taking a learning path that consists of 8 modules. It lasts for 9 hours and 27 minutes and is considered to be an effective way in your preparation for the Microsoft exam. Thus, it will equip you with the knowledge of Azure Virtual Networks, hybrid networking, Azure ExpressRoute, load balancer options in Azure, load balancer solutions for HTTP(S) traffic, network security and monitoring. Besides, you will gain skills to deal with these concepts and also be able to create and apply private access to Azure Services.
The paid option refers to the course AZ-700T00: Designing and Implementing Microsoft Azure Networking Solutions which lasts for 3 days and is led by an instructor. The course focuses on each aspect of Azure networking solutions, covers the procedure of designing and operating core Azure networking infrastructure, network routing, network security, and Hybrid Networking connections. It covers all exam objectives and helps you easily crack all exam questions.
If you’re looking for physical material for the AZ-700 exam, check the Amazon website to find the official guide for the Exam Ref AZ-700 Designing and Implementing Microsoft Azure Networking Solutions (1st edition) by Charles Pluta. It includes all exam topics and concepts tested, what-if scenarios, and expects that you possess the necessary skills to create, apply, and maintain Azure networking solutions.
One more physical edition for you to check is AZ-700: Designing and Implementing Microsoft Azure Networking Solutions: Study Guide With Practice Questions & Labs (1st edition) written by Nouman Ahmed Khan. The author of the book is a solution architect with 15 years of experience in working with a global telecommunication provider. He is also the owner of numerous IT certifications, such as Azure/AWS Architect, CISSP, CISA, CISM, to name a few. So, be sure, that the book includes the actual information you need for your AZ-700 test. Speaking of the content, this printed edition includes exam topics, practice questions, mind-maps, labs, practice questions, real-world examples, and exam tips.
AZ-700 Dumps are Available for Instant Access: https://torrentlabs.itexamsimulator.com/AZ-700-brain-dumps.html
